Connectivity Between Netgear Extender and AT&T Router [Steps]

AT&T WiFi routers or gateways can sometimes fail to fulfill the internet requirements of a user. In that case, adding a Netgear range extender to the home network is suggested. Do you know how to establish connectivity between Netgear range extender and AT&T router?

No? Well, read this blog then. Here, we will discuss easy-to-follow steps that will help you connect your devices for a seamless internet connection. These steps can be executed using the following two methods:

• Manual method (via mywifiext login URL)
• Nighthawk app

How to Connect Netgear Extender and AT&T Router?

No matter which method you are using, we recommend you note down the SSID and WiFi password of your AT&T router or gateway. You will need them while connecting your devices. Apart from this, we also suggest you perform a factory default reset of your extender so that connection process can be completed without interruption. Here’s how you can connect your extender and AT&T router using the aforementioned methods:

1. Connecting Netgear Extender with AT&T Router Manually

Keep the Netgear range extender in the same room as your AT&T gateway and power up both devices. The sequence should be – 1st router and then the extender. You are also required to switch on your computer after that. Once done,

• Connect PC to the default WiFi network (mentioned in the product’s manual) of your Netgear extender.
• Go to a web browser and visit mywifiext.net. You can also use the IP like 192.168.1.250 or 192.168.1.1. Check the user manual before using any.
• This will open up a page containing terms and conditions of using the extender.
• Agree to them.
• The next screen will scan for the networks available in the extender’s range.
• If the SSID of your AT&T router is visible, connect to it using the correct password.
• Now, walk through the on-screen prompts to complete the connectivity between your Netgear range extender and AT&T router.

2. Connecting Netgear Extender with AT&T Router via App

The Nighthawk app has a user-friendly interface using which it is very easy to connect a WiFi extender to any wireless router. However, you must first of all confirm whether your extender supports the use of the Nighthawk app or not. If yes, follow the below-given instructions to connect your range extender to the AT&T router or gateway:

• Connect your mobile phone to the WiFi network of your Netgear extender.
• Go to the App Store or Google Play Store.
• Download and install the Netgear Nighthawk app.
• If prompted, create a Netgear account or log in to an existing one.
• Select the Extender from the list of devices to be installed.

• Follow the in-app instructions to connect your WiFi devices successfully.

In this way, you can establish connectivity between Netgear range extender and AT&T gateway. You can pick the method that you find convenient. Also, ensure that you have to relocate your extender as soon as the setup process completes. But, do not keep the extender far away from the router. If you want to perform Linksys extender setup with AT&T router, you can use the same steps. There will be differences in menus only.

The Concluding Thought

That was all about how to establish connectivity between Netgear range extender and AT&T router. It is expected that the information given here will be fruitful for you. On the off-chance, you fail, ensure that the extender is placed at a distance of 8-10 ft from the router. In case of multiple failures, reset the extender and set it up once again.