How to Connect Nighthawk Router to Printer – A Complete Guide

Being able to print from too many devices and that too without using a complicated cable network is possible today. You can easily connect your printer to the WiFi network to get the printing job done. Through this blog, we will share how to connect Nighthawk router to printer. Thus, be sure that you have completed the router setup before you attempt to connect it to your printer.

Before Connecting Nighthawk Router to Printer

You can install the printer as per the instructions provided by manufacturer. However, before that, you are supposed to take note of the following details of your Netgear Nighthawk router:

• WiFi name (SSID or Network Name)
• WiFi Password (Network Key)
• Security Type (Encryption)

In case you don’t know about these details, you can take the help of the following instructions:

• Load an internet browser on a PC hardwired to your Netgear router.
• Enter 192.168.1.1 into the address bar and log in to the router using the default login details.
• The BASIC Home page of your Nighthawk router will appear.
• Click Wireless.
• The Network Name, Security Type, and Password of your Netgear Nighthawk router will be displayed.

As soon as you come to know about the WiFi details of your router, you can move ahead to connect it to your printer. The steps to do that are mentioned in the next section.

How to Connect Printer to Netgear Router?

Apart from getting aware about the WiFi details of the router, you need to be very sure that your printer is connected to your PC. If you haven’t set up the printer yet, here’s what you need to do:

How to Check Printer Setup?

The following steps will help you set up or add printer on a Windows PC. However, if you have a Mac device, you need to check the manufacturer’s instructions.

• Select Start on your computer and click Settins.
• Click Devices > Printers and Scanners.
• In case your printer is not available on the list, select Add Printer or Scanner.
• Choose the printer model you have.
• Click Add Device and enter the password if needed.
• Your printer will now appear in the Printers and Scanners section.

Steps to Connect Printer to Netgear Nighthawk Router

In case your printer has a touch screen, you can use the wireless setup wizard tool to connect it to WiFi router. The steps are mentioned below:

• Ensure that your printer is on.
• Verify that the printer is present within the WiFi range of your Nighthawk router.
• Tap the Setup option now.
• Select Network or Wireless Settings.
• Tap Wireless Setup wizard.
• You will now be prompted to enter the WiFi network name and password.
• Input the correct values and select OK.
• You’ll see the “Setup Complete” message.

How to Connect Nighthawk Router to Printer via WPS?

You can also use the WPS method to connect your Nighthawk router and the printer. This method is quite useful as you do not need to input the SSID and password of your router. Here’s how you can connect your printer to the WiFi network of your Netgear Nighthawk router.

• Ensure that your printer and router are present in each other’s range.
• Press and hold the Wireless button on your printer for at least 5 seconds until the Wireless light flashes.
• Now, press and hold the WPS button on your Nighthawk router and let the WiFi light blink.
• Your devices are now connected.

This is how you can connect your printer to the Nighthawk router via WPS. The same steps can be followed if you have done WiFi extender setup in your house and want to connect it to the printer.

The Final Words

Connecting a printer to the WiFi network allows a person to print from all the devices connected to that network. We hope that after walking through the above given instructions, you will be able to connect Nighthawk router to printer.