Netgear Router not Connecting to Mediacom Extender?
Is your Netgear router not connecting to WiFi extender? If yes, then you must opt for Mediacom extender. Yes, that’s correct! Mediacom is the best WiFi range extender that you can choose if you want to get high-speed internet to access all over your home. But, prior to that, we suggest you check Mediacom extender compatibility with Netgear router version you have.
“I replaced my existing WiFi range extender with Mediacom. Now, I want to setup WiFi extender. But, I can’t because Netgear router not connecting to Mediacom extender. I have checked Mediacom extender compatibility with Netgear router. Both were compatible to each other. Now, they are not connecting.Help!”
No worries! We have got you covered! Try the troubleshooting hacks highlighted in this post. Over here, you will get to know how to get rid of the issue in discussion and connect your Netgear router and Mediacom extender without any hassle. Given that, continue reading!
Fixes to Netgear Router not Connecting to Mediacom Extender Issue
Without much delay, let’s help you with fixing the issue from the comfort of your house. Keep reading!
Place Your Mediacom Extender and Netgear Router Closer
You may have issues connecting your Netgear router and Mediacom extender if there is too much distance between them. Hence, to connect them in a hassle-free manner, opt for placing your devices closer.The optimal distance between your Mediacom extender and Netgear router is 10-15 feet.
Connect them!
Once you are done with placing your Mediacom extender and Netgear router at a safe distance, then time has come when you need to connect them. So, what you have to do for connecting them without hindrance – put your hands on Ethernet cable and insert its one end in your Netgear router and other end in your Mediacom extender.
What’s More?
Another way that can help you connect your Netgear router and Mediacom extender is the WPS method. For this, press the WPS button on your WiFi extender and then press the same button on your Netgear router. In this way, you can connect Netgear router to Mediacom extender.
Change the Location
Netgear router not connecting to Mediacom extender can persists if both of them are placed at an inappropriate location. So, if you want to connect them smoothly, we suggest you place them in an area in your where they are getting least WiFi signal interference from neighbouring WiFi networks and your home devices like baby monitors, Bluetooth speakers, Google Assistance, etc.
Also, you must avoid placing them inside cabinet, on the floor, near to doors, corners, thick walls, etc.
No Luck?
Still Netgear router not connecting to Mediacom extender? Yes? Then, technical glitches can be the culprit. To deal with the issue, we suggest you restart your Netgear router and Mediacom extender.
How to Restart the Devices?
The instructions that will help you restart your extender and the router is to turn them off first. For this, you have to unplug them and then wait for 15-20 minutes. Now, waiting enough for the mentioned time, you can turn them back on again and try connecting them either using WPS or wireless source.
Update Firmware
Remember that, outdated version on your Mediacom extender and Netgear router is the biggest reasons behind creating connectivity issues between them. So, to overcome with the issue in discussion, we suggest you update the firmware of your Netgear router and Mediacom extender both.
Call Your ISP
Poor internet may also not allow to connect Netgear router to Mediacom extender. To rectify this issue, call your ISP right now. And, if you find your ISP is preventing you from connecting the devices, ask him to get the issue resolved. How? By fixing internet-related issue for you.
Reset and Reconfigure Netgear Router and Mediacom Extender
The above-mentioned hacks don’t help you troubleshoot Netgear router not connecting to Mediacom extender? If yes, then you must try resetting them to factory default values.
How to Reset Mediacom Extender and Netgear Router?
To reset your devices, you have to disconnect them first and then locate the factory reset button on them. Once you have found the reset hole – take a paper clip and insert it in the reset hole of your Netgear router. Wait for 2 minutes and apply the reset process on your Mediacom extender.
Now, you need to perform Netgear router setup and Mediacom WiFi extender setup process from scratch.
Trust us, Mediacom extender compatibility with Netgear router is the best. Once you have configured and connected them, you will get that internet speed to access on your connected devices which you have never expected before.
The Final Thoughts
Now, we are going to end up out blog post. We hope that the fixes highlighted here will help you deal with Netgear router not connecting to Mediacom WiFi extender issue. Apart from this, after going through this blog, we hope you now come to know about Mediacom extender compatibility with Netgear router, aren’t you?